Technical Bulletins...
 The Technical Bulletins included below contain detailed information concerning the troubleshooting and repair of some of the more common problems encountered by our service personnel and customers.

Click on the Subject description to open the pdf file.

If you do not see a subject that describes your problem please contact us or the exclusive UIC distributor in your area.

Bulletin Subject Date
1 Enhancements to 5011/5012/3200/3201 3/26/1993
5 Changing the CM101-134 Detector Cell Assembly 3/24/1994
7 Recommended Spares for Overseas Distributors 1/5/2005
12 Mechanical Electrical/Electronic Specs. 5200 6/23/1995
13 Dip Switch settings for CM5200 Purge/drop times 8/15/1997
15 How to change  Line voltage models CM3200 to CM5014S 8/16/2004
17 Evaluation of the cause of a Low %T on the 5011/5012 2/4/2004
18 Evaluation of the CM150-006 Harness on 5011 8/16/2004
19 Electronic Evaluation of CM5011/5012 Coulometer 8/16/2004
20 Electronic Evaluation of CM5011/CM5012 Power Supplies 8/16/2004
22 Installation of Calibrated set of Boards CM5011/5012 8/16/2004
23 Importance of Calibration on Analytical Performance 12/17/1997
24 Installation of CM101-177 Calibration Kit CM5011/CM5012 6/9/2003
25 New Carousel Photodiode on CM5200 9/16/1999
26 Install new Firmware upgrade CM5240 11/18/1999
27 Install new Firmware upgrade CM5014 11/18/1999
31 Installation of CM110-047 PCB CM5012 9/21/2000
33 CM5240 Second Cleaning Cycle Mod. CM5240 12/19/2000
35 Integrity Checklist CM5300/CM5120 Furnace ( gas flow sys.)  3/12/2002
36 Combustion Tube Installation CM5300/CM5120 Furnace 3/18/2002
37 CM5240 Slider Valve Removal 9/9/2002
38 Installing O-rings in slider valve CM5240 9/11/2002
39 Replacing SV4 valve Assembly CM5240 9/11/2002
41 CM124-031 Plasmadot Display Removal and Installation on CM5014/CM5014S 9/17/2002
42 Cleaning Sulfur Pt Amperometric Indicating Electrode 10/17/2002
43 CM5240 Low Analytical Results 11/25/2002
44 CM5200 Erratic Analytical Results 12/17/2002
45 Preparing CM5240 for Shipping to UIC, Inc. 1/14/2003
46 Changing CM110-049 Processor PCB in CM5014/CM5014S 5/4/2004
47 Changing Valve cartridges Acid/water pumps CM5240 4/14/2003
48 Replacing SV5 valve in CM5240 8/5/2003
49 TC replacement in CM5200 2/2/2004
50 CM5130 Leak Check Procedure 2/10/2004
51 Expected Consumable Usage for Carbon Analysis Systems 2/10/2004
52 Simultaneous C/S Cell Assembly 2/10/2004
53 CM5014S Oxygen Dosing Solenoid Valve 2/10/2004
54 CM5240 Leak Check Procedure 2/10/2004
55 Required Materials for UIC System Components 2/10/2004
56 Evaluation of low response number in CM5014 3/1/2004
57 Electronic check CM5014 Coulometer 3/2/2004
58 CM5240 Acid/Rinse Pump Electronic Testing 7/29/2004
59 CM5200 Overtemp protection adjustment 8/19/2004
60 Changing CM110-065 PCB in CM5014/CM5014S 6/16/2005
61 Electronic Evaluation of CM5014S 11/17/2005
64 Erratic Carousel Movement on CM5200 9/14/2006
65 Installing CM101-240 Calibration Kit on CM5014 8/7/2007