Automated
Boat Inlet
§
Improved Sample
Introduction
§
Solid or Liquid
Samples
§
Eliminates
Ladle Breakage
§
Controlled
Sample Handling
The CM5390
Automated Boat Inlet from UIC, Inc. is the latest accessory in our product
line designed to provide enhanced ease-of-use and analytical reproducibility.
The CM5390
is used in conjunction with UIC’s CM5120 and CM5300 high-temperature furnaces
and either the CM5011, CM5012 or CM5014 coulometer to provide an improved
method of sample introduction.
The Automated
Boat Inlet has a large, easy to access sample entry box, user selectable
sample entry speeds, variable purge time setting and an integrated
flowmeter. The CM5390 replaces the
traditional “dog houses” and breech block assemblies found on UIC’s standard
analytical systems.
EASY TO USE
The CM5390
eliminates the need to remove and replace breech block caps to insert and
retrieve sample ladles. This also
eliminates the chance of breaking any sample ladles.
Simply
weigh out your sample, place it into the sample entry box, close and latch the
lid, and start the analysis. The system
is automatically purged of atmospheric CO2, the sample is then automatically
introduced, analyzed and retracted* with no user input. Samples can now be analyzed with, literally,
“one hand tied behind your back”.
*When used with a CM5014
coulometer
SPECIFICATIONS –
Electrical Requirements – 115V, 50/60Hz, 2A
Sample Entry Time – Variable, 24 – 53 seconds
System Purge Time – Variable, 16 – 292 seconds
Sample Capacity – Up to 20 g (sample dependent)
Dimensions, LxWxH, in. (cm) –
18x11x13 (46x28x33)
Net Weight – 20 lbs. (9kg)
Ordering Information -
CM5390-01 – Automated Boat Inlet
Includes: CM5390
base unit, CM211-019 combustion tube, CM201-040 ladle entry tube, CM201—042
hook ladle, 3 x CM251-005 large porcelain boats, accessories, power cord and
operation manual. For 115V operation.
CM5390-02 – Automated Boat Inlet
Includes: Same as above, except equipped for 230V operation.